I have just fitted a removable steering wheel to Helga so we can slide the drivers seat further back, also good anti- theft, hard to pinch if you can’t go around corners!
When looking into this, saw a kit from Marcle Leisure, but sending them an email they don’t sell them any more.
So back to the drawing board and found this boss hub on ebay: https://tinyurl.com/yxszeb2w and this quick release hub on amazon: https://tinyurl.com/yxuht6ov There are lots of aftermarket steering wheels which will fit these kits, I went for this one: https://tinyurl.com/y52yqwsb quite expensive as it came from the USA, but the blue does match the seats!
First ensure your wheels are straight, and the steering lock is on. Remove the horn button, 3 hex bolts behind the steering wheel to reveal the holding nut.
Get the big socket set out and undo until the last 2 or 3 threads. Unclip the horn wires. Knock the wheel from behind to loosen it, that’s why you keep the nut on to stop you hitting yourself in the face (I am speaking from experience here!)
Pass the horn wires through the boss, slip it over the spline and secure with the original nut.
Cut the horn wires and solder onto the lower part of the quick release hub, then bolt onto to the black boss.
Attach the top half of quick release boss, and find correct position for steering wheel, plug in horn and bolt down with supplied bolts.
As you can see the seat now slides around 6” further back.
