Home › Forums › Modifications & Enhancements › Replacing the DIN socket with a twin USB socket › Reply To: Replacing the DIN socket with a twin USB socket
Hi again Barry
Yes you’re right.
I discovered the hard way about the strip light being connected directly to the leisure battery. At the 12 month point I took my van back to Brownhills for its first habitation service to protect the warranty. At the end of this service the strip light was left on and nobody noticed. Some time later I arrived to collect my van (it was necessary for my wife to be free as well to drive back our car – a round trip of 240 miles -hence not doing it immediately) and did the series of checks I do on my van after a service before I drive away. I found the leisure battery was flat. The panel switch for the 12v system was off. So why was the battery flat? I stayed with the electrician whilst he investigated. Very red faces when he found that this strip light was on. A sinking heart from me when they said “we will not replace your 2 leisure batteries” for we all know that running a battery absolutely flat shortens its life considerably. And that’s why this light is not connected to the engine battery because one’s mobility is maintained when the leisure battery is flat but not so if it’s a flat engine battery.
Keith