Good afternoon
Feedback from the EBL repair
1. Your EBL99 and LT99 have been repaired and will shortly be ready for return. Damage had been caused by liquid ingress to the front board around the area of Block 2 and Block 3. Corrosion to the PCB track has been removed, the damaged track has been replaced and the area of damage coated with water repellent lacquer. Both the EBL99 and the LT99 have been fully tested with no faults found.
2.The water ingress looks almost as if it has percolated down the control panel interconnection cable. Just because of where the PCB had the damage around block 3. If the control panel is in the skin above the door, it might be worth having the panel out to see if it’s wet behind it.
Tom