Home Forums General Discussion EXSIS SK Water Tank Removal

Viewing 0 reply threads
  • Author
    Posts
    • #95284
      SkippyUpOver
      Participant

        Hi All,

        I have a small Exsis SK from 2005.

        I have a severely reduced water pressure and it looks like the water pipe is partially blocked between the tank outlet and the first T section in the bathroom.
        The pump is rated at 12 litres per minute, and we are getting 1 liter per minute at the kitchen sink, and much less in the bathroom.
        The water pipe runs down the side of the water tank – roughly a metre, then does a right angle and crosses under the shower floor and comes up behind the heating. I pushed a 4mm coax cable through and it is almost blocked at the right angle – I could only just get it through.
        I am pretty sure I can only get to this by removing the water tank.

        Has anyone done this on one of these vans? It looks like one bolt is holding it in, and probably the filler fitting would need to come out. But most of the van seems to also be glued…

        Thanks,

        Nick

    Viewing 0 reply threads
    • You must be logged in to reply to this topic.